There are six 10 Series extrusions to choose from - 1"x1", 1"x1" QR, 1"x2", 1"x3", 2"x2" and 2"x4". The 10 Series TSLOTS have .255" slot widths and are modular to each other. Accessories throughout this catalog allow you to build a complete structure with our 10 Series accessories and transition it to our 15 Series. The 10 Series T-Slot design has an inside radius of .125" to make sliding drop-in T-Nuts easier.
There are twelve 15 Series extrusions to choose from – 1.5"x1.5" to 3"x6". The 15 Series TSLOTS have .322" slot widths and are modular to each other. Accessories throughout this catalog allow you to build a complete structure with our 15 Series accessories and transition it to and from our 10 Series. The 15 Series T-Slot design has an inside radius of .187" to make sliding drop-in T-Nuts easier.
 |
Fractional size - 1.0 inch x 1.0 inch
|
 |
|
Description:
Cross Sectional area: .446 in2 (2.877 cm2)
Moments of Inertia: Ixx = .045 in4 (1.872 cm4) / Iyy = .045 in4 (1.872 cm4)
Weight per Foot: .535 lbs/ft (.796 kg/m)
|
|
|
|
 |
 |
Fractional size - 1.0 inch x 2.0 inch
|
|
|
Description:
Cross Sectional area: .806 in2 (5.199 cm2)
Moments of Inertia: Ixx = .084 in4 (3.494 cm4) / Iyy = .311 in4 (12.938 cm4)
Weight per Foot: .967 lbs/ft (1.439 kg/m)
|
|
|
|
|
 |
Fractional size - 1.5 inch x 1.5 inch Heavy
|
|
Description: for Heavy Duty Applications / Guarding, door frames, frames for sliding panels, supporting heavy loads, etc.
Cross Sectional area: 1.196 in2
Moments of Inertia: Ixx = 0.267 in4 / Iyy = 0.267 in4
Weight per Foot: 1.406 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 1.5 inch Light
|
|
Description: for Medium Duty Applications / Guarding, door frames, frames for sliding panels, supporting heavy loads, etc.
Cross Sectional area: 0.947 in2
Moments of Inertia: Ixx = 0.198 in4 / Iyy = 0.198 in4
Weight per Foot: 1.114 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 1.5 inch quarter round
|
|
Description: for Light Duty Applications / Ideal for clean room guards or office furniture, and putting finishing touches on machines.
Cross Sectional area: 0.832 in2
Moments of Inertia: Ixx = 0.163 in4 / Iyy = 0.163 in4
Weight per Foot: 0.998 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 1.5 inch mono-slot
|
|
Description: for Light Duty Applications / Ideal for clean room and aesthetic applications as well as office furniture.
Cross Sectional area: 1.095 in2
Moments of Inertia: Ixx = 0.247 in4 / Iyy = 0.247 in4
Weight per Foot: 1.288 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 1.5 inch 90 degree bi-slot
|
|
Description: for Light Duty Applications / Ideal for clean room and aesthetic applications as well as office furniture.
Cross Sectional area: 1.104 in2
Moments of Inertia: Ixx = 0.248 in4 / Iyy = 0.248 in4
Weight per Foot: 1.298 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 1.5 inch 180 degree bi-slot
|
|
Description: for Light Duty Applications / Ideal for clean room and aesthetic applications as well as office furniture.
Cross Sectional area: 1.104 in2
Moments of Inertia: Ixx = 0.249 in4 / Iyy = 0.248 in4
Weight per Foot: 1.298 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 3.0 inch Heavy
|
|
Description: for Heavy Duty Applications / Ideal for most workstations, benches, air lines, electrical wires, compressed air to run through center.
Cross Sectional area: 2.038 in2
Moments of Inertia: Ixx = 1.866 in4 / Iyy = 0.484 in4
Weight per Foot: 2.397 lb/ft
|
|
|
|
|
 |
Fractional size - 1.5 inch x 3.0 inch Light
|
|
Description: for Medium Duty Applications / Ideal for supports for areas of medium weight. Stronger than 1.5 x 1.5 heavy and lighter than the 1.5 x 3.0 heavy. Also used for framed sliding doors.
Cross Sectional area: 1.374 in2
Moments of Inertia: Ixx = 1.285 in4 / Iyy = 0.305 in4
Weight per Foot: 1.616 lb/ft
|
|
|
|
|
|
 |
Fractional size - 3.0 inch x 3.0 inch Heavy
|
|
Description: for Heavy Duty Applications / Can run air lines, electrical wires, compressed air, etc. through center. Ideal as supports for machine bases and tables.
Cross Sectional area: 3.070 in2
Moments of Inertia: Ixx = 3.211 in4 / Iyy = 3.211 in4
Weight per Foot: 3.611 lb/ft
|
|
|
|
|
 |
Fractional size - 3.0 inch x 3.0 inch Light
|
|
Description: for Light Duty Applications / Ideal for supports for areas of medium weight. Stronger than 1.5 x 3.0 heavy, lighter than 3.0 x 3.0 heavy. Also used for framed sliding doors. Can run air lines, electrical wires, compressed air, etc. through center. Ideal as supports for machine bases and tables.
Cross Sectional area: 2.177 in2
Moments of Inertia: Ixx = 2.3434 in4 / Iyy = 2.3434 in4
Weight per Foot: 2.559 lb/ft
|
|
|
|
|
 |
Fractional size - 3.0 inch x 6.0 inch Heavy
|
|
Description: for Heavy Duty Applications / Ideal for air lines, electrical wires, compressed air, to run through the center. Ideal as supports for machine bases and tables, as well as with welding fixtures.
Cross Sectional area: 6.557 in2
Moments of Inertia: Ixx = 22.625 in4 / Iyy = 6.549 in4
Weight per Foot: 7.703 lb/ft
|
|
|
|
